DTF Heat Press Instructions
How to Press Print Addix DTF Transfers
Thank you for choosing Print Addix for your DTF Transfers and DTF Gang Sheets. Follow these simple heat press instructions for the best results.
Recommended Press Settings
Temperature: 300°F – 320°F
Time: 10 – 15 seconds
Pressure: Medium to firm
Peel: Warm or cold peel depending on transfer film
Second Press: 5 – 10 seconds
Pressing Steps
-
Pre-press the garment for 3–5 seconds to remove moisture and wrinkles.
-
Place the DTF transfer on the garment in the correct position.
-
Press at 300°F – 320°F for 10–15 seconds using medium to firm pressure.
-
Peel the film warm or cold, depending on the transfer. If the design lifts, press again.
-
Second press with parchment paper or a finishing sheet for 5–10 seconds for better durability.
Washing Instructions
For longer-lasting results:
Wait 24 hours before washing
Wash inside out
Use cold or mild water
Avoid bleach
Tumble dry low or hang dry
Do not iron directly on the design
Important Note
Heat presses can vary, so we recommend testing before full production. Print Addix is not responsible for application issues caused by incorrect temperature, pressure, peeling, or washing.
Contact Print Addix
Need help with DTF Transfers or DTF Gang Sheets? Contact us today.
Print Addix
1123 N. High St Suite 2
Carlinville, IL 62626
United States
Phone: 217-854-9337
Email: kim@awesomeinksigns.com